Unitronics’ Remote Operator

by Unitronics


Productivity

free



Unitronics Remote Operator - View & operate the PLC’s HMI as if onsite.

Read more

The Remote Operator app enables you to remotely access your Unitronics controllers using your smartphone and tablet.- Remotely access Vision and Samba controllers via Internet or wireless LAN connection- Control and monitor automation and machines remotely- View operational conditions, Alarms, data, and Trends in real time- ‘Full Control’ or ‘View Only’ work mode selection- Pinch to zoom- Favorites and Groups- Shareable Configurations – send your Favorites and Groups to another deviceRequirements:Mobile device minimum OS version: Android 4.0+, API 14+ Supported Controllers:V350, V430, V700, V570, V1040, V1210, SM35, SM43, SM70InformationDeveloper/publisher: Unitronics (1989) (R"G) LtdSupport: http://www.unitronics.com/supportView and Download the QuickStart Guide:http://www.unitronics.com/Unitronics_Apps/Unitronics_Remote_Operator_AppQuickStart.pdf *First-time Use1. Open Remote Operator.2. Create a Password, set up password recovery.3. Tap OK, the app opens an empty Favorites screen. **Adding PLCs to Favorites/GroupsTap + to add PLCS, configure controllers and communication channels. Enter:- PLC NicknameOptional. Must be unique. - PLC NameMust exactly match the actual PLC Name, including capitals. - IP Address/Host, TCP and PortDefines communication channelNOTE:1. IP Address & Port MUST be a unique combination.2. Format: Incorrect 10.000.000.037 Correct 10.0.0.37. - Group NameTap to open the Group list.Add to Favorites: When checked, the PLC is added to the Favorites list as well as a Group. When finished, if desired, tap Check PLC Connection.Tap OK to save the PLC and return to Favorites.To delete a PLC, press and hold it to reveal the available options. *Adding Groups1. In the Favorites screen, tap <=(left-facing arrow) to open Groups.2. Tap + to add a Group.3. Enter Group Name and Comment.4. Tap OK to add the Group.5. Tap <= to return to Favorites.6. Tap More (three bars, upper right side of the screen) to Hide/Show the Application Bar. *Using Remote OperatorIn Favorites or Groups, a PLC marked with a green hand is active. Access it remotely by tapping it.During a session, your mobile screen displays the PLCs HMI panel, along with a red Application Bar.This Bar shows (from left to right):- Connected PLC name- Connection duration- Buttons:> Switch modes: View Only /Full Control. Disable/enable buttons and touch properties on the HMI panel displayed on your mobile> Set Refresh rate (seconds)> Pause Remote session> Exit Remote session **PLC InformationTo view /edit, tap i: PLC Communication- To edit details, tap fields; set View mode: View Only/Full Control.- Check the PLC Connection. PLC System Info- When connected:Tap Get PLC Information to view PLC OS data.- When not connected:Shows details of last session.PLC Location Info- Tap to enter data: location, contact details, comments, edit the PLC’s group.- Delete PLC from Favorites: uncheck Add to Favorites. *Application SettingsTap More to show Application Bar if hidden, then tap Settings button.Startup Page: Remote Operator automatically loads/checks communications for all PLCs on Startup pageSharing Settings:1. Tap Share, follow instructions to send the file Share.unitronics.2. When Share.unitronics is received on the second device, tap to open it. Remote Operator opens the Share file.Remote Operator MUST be installed on the receiving device.This version support 64 bit.Fixed: Network ID had no effect, and the connection was treated as a Direct connection.

Read trusted reviews from application customers

Good

Farrukh Siddiqui

Awesome! Works flawlessly with our V700 and a Wifi access point. One thing we could use is the option to have an audible cell phone alarm tied to a MB or linked to an output. I have an alarm tied to an output on the V700 and would like to have that alarm mirror on my phone.

Brian Mollohan

I can get it working with VPN. It's just flakey. Some days it won't connect to the panel, requiring me to manual reset the panel then it works. Not sure if that's the app or a panel issue though.

AJ Rockefeller

not comparable with s10+

Heba Abulfadle

Work only inside subnet. Can't connect using VPN. Must be disconnect other network connections and connect only in same network with PLC. Need to be made possibility connect outside the subnet.

Mikko Virtanen

Excellent. very useful.

A Google user

Does exactly as it describes with minimal set up fuss

Kieran Dinsdale

It do not import pictures and touch pad is all Red

Alan Braga

it does not hint on what products it works with. I had no luck connecting to their v1210 hmi

david murray

Very good

gena vilenski